|
QLA FCode for 2Gb HBAs
|
This software license applies only to QLogic customers.
QLogic Corporation.
All rights reserved. |
|
1. Version
These release notes describe the changes, fixes, known issues, and release details
that apply to QLA FCode for 2Gb HBAs, version 2.00.10.
This software supports firmware version 2300tp2x 03.03.21 and firmware code cs2x
3.03.117.
2. Changes
The following changes have been made to the QLA FCode for 2Gb HBAs between versions
2.00.09 and 2.00.10.
Hardware Support
N/A
OS Support
N/A
Software Components
- Created the
ext-loopback-test command to allow manual execution of external Loopback.
- Added
menu to the set-mode & show-mode words, used to set compatibility mode.
- Changed
sd open to check login-boot-device flag before disk-spinning execution.
- Changed
set-boot-ID to accept only WWPN & LoopID, not LUN, and changed the readme.
- Made the
login-boot-device no longer done in open (it is now done in sd child
node every time).
- Added
rsp-iocb-valid? in do-cur-iocb (use sdc byte in IOCB for handle #).
- Added the
show-settings word, which shows all the HBA's info and NVRAM settings.
- Added level debugging and more debugging in
get-my-ID and execute -command .
- Added compressed firmware algorithm from IBM code.
- Reorganized code with common directory, which has code common to Sun & qla.
- Added 16-bit LoopID.
- Added 16-bit LUN capability.
- Flattened build directory.
Industry Standards Compliance
N/A
3. Bug Fixes
The following fixes have been made to the QLA FCode for 2Gb HBAs between versions
2.00.09 and 2.00.10:
- Fixed External Loopback test to execute via selftest only if in Loop topology.
- Fixed Selftest Memory test
do-mem-test & test-mem return status & print "Passed."
- Put in SNS command fixes, including Get Port Name(x112) bug found in IBM code.
- Added level debugging.
- Added N-port topology support to fix bugs in
show-children & login-boot-device .
- Made the words
get-sense , short-data-command , and retry-command external.
- Took
isp-online-self-test out of selftest (it did not work with FW 3.03.21).
- Fixed bug in
logout-devices to support logging out from device.
- Fixed processing of
get-ID-for-fc4type GID_FT buffer to check for null buffer.
- Fixed stack bug in
show-children when topology is not valid.
4. Known Issues
N/A
5. Additional Information
N/A
6. Trademarks
QLogic, the QLogic logo, QLA, SANbox, SANsurfer, and SANblade are registered trademarks of QLogic Corporation. SANtrack and SAN Express are trademarks of QLogic Corporation.
All other brand and product names are trademarks or registered trademarks of
their respective owners.
7. Notices
Information furnished in this document is believed to be accurate and reliable.
However, QLogic Corporation assumes no responsibility for its use, nor for any
infringements of patents or other rights of third parties which may result
from its use. QLogic Corporation reserves the right to change product
specifications at any time without notice. Applications described in this
document for any of these products are only for illustrative purposes. QLogic
Corporation makes no representation nor warranty that such applications are
suitable for the specified use without further testing or modification. QLogic
Corporation assumes no responsibility for any errors that may appear in this
document.
8. Contacting Support
Please feel free to contact your QLogic approved reseller or QLogic
Technical Support at any phase of integration for assistance. QLogic
Technical Support can be reached by the following methods:
Web: http://support.qlogic.com
North America Contact Information
Email: support@qlogic.com
Phone: (952) 932-4040
Support contact information for other regions of the world is available
at the QLogic website:
http://support.qlogic.com
Go to Top
|
© Copyright 2007. All rights reserved worldwide. QLogic, the QLogic logo, and the Powered by QLogic logo are registered trademarks of QLogic Corporation. All other brand and product names are trademarks or registered trademarks of their respective owners.
|
|